Will it start?

I think the header bolts are loose.

I bought new switchgear from EPF Guzzi and wired it into the bike in this way:

pin - switchgear  - description    - V65C wire harness
------------------------------------------------------
1   - yellow      - pass. hi beam  - green
2   - black       - horn. ground   - black
3   - brown       - left  t/s      - green/black
4   - green       - low beam       - brown
5   - brown/white - t/s main wire  - orange
6   - red/yellow  - h/l main wire  - black/red
7   - blue        - blank          - yellow
8   -   pink        - horn main wire - black/white
9   - dark green  - right  t/s     - pink

header gaskets
brake pads
right sidecover
speedo cable – 34″
footpeg rubbers
tach cable – 24.5″
timing cover bolts
sump hose and clamp
key switch
mufflers/pipes screw em, I’m wrapping the holes with tape
cable heads (connects cables to gauges at 90deg)
center stand hardware
passenger pegs
keyswitch
clutch cable
choke cables
tank clamp
center stand spacer
center starnd nut
instrument panel bulbs
bars
spring – 12 43 40 01 -or- 98 05 45 30
starter switch
fuse box cover
handlebar brake lever – 7.5″
brake transfer shaft
handlebar brake reservoir (white plastic ring)
timing group cover
clutch lever spring
shocks